Our flat & static sealing solutions
Essential part of which depends the perfect running and security of entire plants, the sealing device must be definited since the products studying process, and taking into account all conditions of use ; but nevertheless, some sealing problems can arise in duty. That is the reason why Jicey manufactures at your demands the flat stactic sealing devices that you need, around its basic technologies: industrial lamination and the carving of thin and ultrathin materials, but also in
all materials and all shapes according to your plans. Our quality charter ( ISO 9001 Certification ) and the respect of the specifications that we will determine in partnership, guarantee the quality of our prestations. If you need a flat seal for your new product, Jicey provides you solutions in accordance with complex parameters (fluid involved, temperature of use, pressure, solidity and quality of the seal surface, variations in temperature, vibrations).
If you need a flat seal to strengthen or improve the properties of existing seals Jicey partners with leading industries and gives you solutions by analysing your new imperatives and by improving your project. Choosing a good seal, it is both selecting the right material, at the best price and determining the correct thickness
brochure
MATERIALS
|
Designation |
Applications |
Properties |
CNE |
Neoprene Rubber |
Everything subject to atmospheric agents |
Insoluble in hydrocarbons, water, alcohols, non-flammable |
CPE |
Nitrile Rubber |
Gas-Oils-Solvents |
Resistant to hydrocarbons |
CVI |
Viton Rubber* |
Engines - Nuclear Reactors |
Resistant to temperatures, chemical - acid products, non-flammable |
LAR |
Jicey Reinforced Cork |
Industrial seals, automobiles, etc. |
Resistant to oils and fuels |
LGF |
Jicey GF Cork |
Industrial seals, automobiles and liquefied gas (approved by Gaz de France) |
Resistant to oils and fuels |
LCB |
Jicey Butadiene Copolymer Cork |
Industrial seals, automobiles and building (gas heating) |
Resistant to oils, hydrocarbons, liquefied gases and ageing |
LRS |
Jicey super A Cork |
Industrial seals |
Low combustibility and creeping, tension resistance |
LAG |
Agglomerate Cork |
Industrial seals, automobiles, etc. |
Compressible, strength, low cost |
KLI |
Jicey KLI |
Seals for steam, dry chlorine, ammonia |
|
PRODUCTS
Among these six materials' family, we manufacture or we have selected the following products :
ELASTOMER
INTRINSIC PROPERTIES : high elastic recovery, incompressible
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
NATURAL |
CNA |
Water, air, subject to atmospheric agents, food industries |
from 20 to 95 ShA |
T°C -30 +80 |
NEOPRENE |
CNE |
Water, air, subject to atmospheric agents |
insoluble in hydrocarbons, non-flammable |
T°C -20 +120 |
NITRILE / PERBUNAN |
CNI / CPE |
Gas, hydrocarbons, solvents |
from 35 to 95 ShA |
T°C -55 +130 |
VITON* |
Acids, hydrocarbons, solvents, very aggressive environments, high temperatures |
resistant to temperatures, non-flammable (self-extinguishing) |
T°C -25 +230 |
|
BUTYL |
|
Water, gas, acids, strong bases, very corrosive environments |
resistant to atmospheric agents, food industries, from 50 to 80 ShA |
T°C -60 +135 |
EPDM |
CEPD |
Strong bases, vapor, liquefied gases, solvents, atmospheric agents |
very good resistance to atmospheric agents |
T°C -55 +145 |
SILICONES |
CSI |
Water, acids, bases, subject to atmospheric agents |
from 20 to 80 ShA |
T°C -100 +270 |
CORK
INTRINSIC PROPERTIES : high compressibility, usable in low pressures conditions, average temperatures
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
NATURAL CORK |
LAG |
Water, oils, hydrocarbons: casing gaskets |
Highly compressive, can be used with poor sealing plans |
No dimensional stability when stocked |
Water, oils, hydrocarbons: casing gaskets |
Highly compressive, can be used with very poor sealing plans. Excellent dimensional stability |
T°C -30 +100 |
||
BUTADIENE CORK |
LCB |
Hydrocarbons, solvents, heating, gases |
Good compresibility, resistant to ageing, average dimensional stability. |
Less compressive than natural cork |
Hydrocarbons, solvents, heating, liquefied gases |
registered by GAZ DE FRANCE, resistant to ageing, average dimensional stability |
T°C -30 +130 |
PAPERS
INTRINSIC PROPERTIES : average compressibility, usable in low pressures conditions, average temperatures
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
PAPER JH |
PJH |
Air, water, oils, hydrocarbons |
low compressibility |
T°C -20 +150 |
PAPER + NBR |
Air, water, cold and warm oils, hydrocarbons and anti-freeze |
average compressibility, very good elastic recovery |
T°C -20 +150 |
|
PAPER +NBR |
Air, water, cold and warm oils, hydrocarbons and anti-freeze |
good compressibility, good elastic recovery |
T°C -20 +150 |
|
PAPER + NBR |
Air, water, cold and warm oils, hydrocarbons and anti-freeze |
good compressibility, very good elastic recovery |
T°C -20 +150 |
* Ahlstrom Altenkirchen GmbH trade mark
WITHOUT ASBESTOS
INTRINSIC PROPERTIES : average compressibility, usable in high pressures conditions, high temperatures
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
TBA* |
air, water, oils, hydrocarbons, acids, bases, gas |
For temperatures of 220°C. Good compressibility, good elastic recovery |
T° MAX vapor 180°C, |
|
vapor, hydrocarbons, alkaline environments |
For temperatures of 300°C. |
T° MAX vapor 250°C, |
||
GRAPHITE+NBR |
TBG* |
vapor, hydrocarbons, alkaline environments, gases, low acid environments |
For temperatures of 300°C. Average compressibility |
T° MAX 400°C, |
water, vapor, oils, organic acids, air, hydrocarbons |
For temperatures of 350°C. Average compressibility, |
T° MAX 440°C, |
||
aggressive chemical products, hydrocarbons, thermal shocks |
For temperatures of : |
pressure MAX< 40 bars |
||
aggressive chemical products, hydrocarbons, thermal shocks |
For temperatures of : |
pressure MAX< 50 bars |
METALLOPLASTIC
INTRINSIC PROPERTIES : average compressibility, usable in high pressures conditions, high temperatures, very high thermal conductivity
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
Water, oils, hydrocarbons, cylinder head gasket thermal engines and compressors, |
Resistant to temperatures and pressures. Good compressibility , |
T° MAX 300°C, |
METAL
INTRINSIC PROPERTIES : low compressibility, usable in VERY high pressures conditions, VERY high temperatures, good thermal conductivity
DESIGNATION |
SYMBOL |
APPLICATIONS |
PROPERTIES |
LIMITS |
STEEL seal |
JAC |
Water, oils, hydrocarbons, cylinder head gasket thermal engines and compressors |
excellent resistance to temperatures and pressures. |
T° MAX 450°C, |
STAINLESS STEEL seal |
JAI |
Water, oils, acids, bases, hydrocarbons, cylinder head gasket thermal engines and compressors |
excellent resistance to temperatures and pressures. |
T° MAX 450°C, |
COPPER seal |
JCU |
Water, oils, hydrocarbons, cylinder head gasket thermal engines and compressors |
excellent resistance to temperatures and pressures, good compressibility |
T° MAX 400°C, |
Jicey’s flat static seals
